| After-sales Service: | Provide |
|---|---|
| Range: | 30/50/100/150/200/300/500m |
| Measurement Accuracy: | ±3mm |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
30/50/100/150/200/300/500 water level.
Steel level water gauge
Upgraded version: using stainless steel cable, more firm. (Ordinary copper wire is very thin and easy to stretch and break). The sensitivity can be adjusted to suit various water qualities, and liquids with low conductivity can also be measured.
Overview
This steel ruler water level gauge provides the most accurate method for measuring water levels. It is usually used to measure the water level in wells, boreholes, and water level pipes. It is especially suitable for the observation of groundwater levels in hydropower projects or the dam body of earth and rock Manual inspection of the infiltration line. This instrument can be used during construction and can also be used for long-term safety monitoring of engineering. Comply with technical regulations for safety monitoring of earth-rock dams (SL60-94)
The principle structure
The reading of the water level change has two major components:
1. The underground material embedded part is composed of water level pipe and bottom cover (sold separately)
2. Ground receiving instrument-steel ruler water level gauge, consisting of measuring head, steel ruler cable, receiving system, and winding plate.
Probe part: Made of stainless steel, water resistance contact points are installed inside. When the contact point contacts the water surface, the receiving system will be turned on. When the contact point leaves the water surface, the receiving system will be closed.
Steel rule cable part: The steel rule and wire are combined into a plastic process, which prevents the steel rule from rusting and simplifies the operation process. The reading is more convenient and accurate.
Receiving system: It consists of a horn, an indicator, and a peak indicator. The buzzer sounds continuous, the indicator light is on, and the peak indicator is indicated by the voltmeter.
Method of use
When measuring, let the bobbin rotate freely, press the power button, put the probe into the water level tube, hold the steel rule cable in hand, let the probe move down slowly, and receive when the contact point of the probe contacts the water surface The system's sounder will beep continuously. At this time, read the depth of the steel rule cable at the nozzle, which is the distance from the groundwater level to the nozzle. (If the buzzer is inaudible when measuring in a relatively noisy environment, observe the indicator and voltmeter.)
Users must pay attention to two points when reading
A) When the contact of the probe touches the water surface, the sounder will make a sound, the indicator light will be on, and the voltmeter pointer will rotate. At this time, the steel rule cable should be put slowly in order to read the depth of the point from the opening carefully after carefully finding the exact location of the pronunciation or indication moment.
B) The accuracy of the reading depends on the timely judgment of the starting position of the buzzer or the instruction. The accuracy of the measurement is related to the proficiency of the operator, so it should be repeatedly practiced and operated.
Maintenance
Because the battery capacity is limited, whenever the measurement is completed, the power switch should be turned off immediately, do not forget! When replacing the battery (battery is 9V, multimeter battery), unscrew the battery cover screw and push the battery cover open to replace the battery.
After the measurement, the probe and the steel rule cable must be wiped clean, and the steel rule cable must be neatly wound on the reel, and then placed in the cabinet.
The measuring cable must not be bent, especially near the end of the side head to avoid damage.
The probe should be handled with care, avoiding severe vibration. If you find that the probe is faulty, please send it to our factory for repair in time.
|
Model |
30 |
50 |
100 |
150 |
200 |
300 |
500 |
|
Measuring depth |
0-30 |
0-50 |
0-100 |
0-150 |
0-200 |
0-300 |
0-500 |
|
Min reading |
1 |
||||||
|
Repetitive reading |
+- 2 |
||||||
|
Worre pressure V |
DC=9 |
||||||
|
Weight Kg |
3.5 |
4.5 |
6.5 |
10 |
12.5 |
17.5 |
27.5 |
Henan Rancheng Machinery Co.,LTD is one professional supplier drilling rigs in China ,we
are dedicated in designing and manufacture water well drilling rigs ,rotary drilling rig ,anchor drilling rig ,DTH drilling rig ,solar pile driver,mud pump ,air compressor and drilling tools etc,we have advanced technology ,Modern equipment, first-class team and rich experience ,our products passed ISO9001 ,CE etc certificated ,they are exported to around 200 countries and areas in the world ,get very good feedbacks from our clients.
We pursue the principle of "Customer First, Integrity First", we are sincerely expecting to cooperate with you!!!
1.Why choose us ?
Rancheng Machinery is a very professional drilling rig supplier in China. We have rich experience in this industry for 11 years.Now our products are serving around the world.we have High Quality, Competitive Price, and Fast Shipment.
2.Do you offer any custom designs?
Yes,we have our own trade factory. We provide services to top range partners.Produce a superior product for you by your designs.
3,How to make sure the quality we sent to you is same with what we said?
We are the Golded supplier on Alibaba, order through the alibaba trade assurance, will ganrantee the safe of your money and the quality of the goods.
4.How To Order ?
Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.
5. When will make delivery ?
About 10-15 work days after receipt of the payment.
6.After-sales Service
1 year warranty for all kinds of products;
If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.
){kind=link}